Delta Electronics VFD-VL manual Fixed plate

Chapter 1 Introduction

Step 2: place the 8 screws back in to secure the fixed plate 1 and fixed plate 2 (as shown in the following figures) with the following torque.

Frame C: 14-17kgf-cm [12.2-14.8in-lbf]

Frame D: 20-25kgf-cm [17.4-21.7in-lbf]

Frame E: 20-25kgf-cm [17.4-21.7in-lbf]

1		1
2		2
fixed plate 1	3	fixed plate 2	3
	4		4

Step 3: Please notice that it doesn’t need to put those 8 screws shown in the following figures back to the drive. Moreover, please make sure that these 2 different fixed plates are put in the correct side as shown in the figures.

5

16

2

3	7
4	8

1-10 Revision Nov. 2008, VLE1, SW V1.03