Delta Electronics VFD-VL manual Content Address Function

Chapter 4 Parameters

Content	Address			Function
		Bit 12		1: disable bit 06-11
		Bit 13~14		00B: No function
				01B: operated by digital keypad
				02B: operated by Pr.00-15 setting
				03B: change operation source
		Bit 15		Reserved
	2001H	Frequency		command
		Bit 0		1: EF (external fault) on
	2002H	Bit 1		1: Reset
		Bit 2		1: B.B. ON
		Bit 3-15		Reserved
	2100H	Fault code:		refer to Pr.06-16 to Pr.06-21
		Bit 0-Bit 1		00: Stop
				01: deceleration
				10: Ready for operation
				11: operation
		Bit 2		1:JOG command
Status				00: FWD command, FWD output
		Bit 3-Bit 4		01: FWD command, REV output
monitor Read				10: REV command, FWD output
only				11: Reserved
	2119H	Bit 5		Reserved
		Bit 6		Reserved
		Bit 7		Reserved
		Bit 8		1: Master frequency Controlled by communication
				interface
		Bit 9		1: Master frequency controlled by analog/external
				terminals signal
		Bit 10		1: Operation command controlled by
				communication interface
		Bit 11		1: Parameters have been locked
		Bit 12		1: enable to copy parameter from keypad
		Bit 13-15		Reserved
	2102H	Frequency	command (F)
	2103H	Output frequency (H)
	2104H	Output current (AXXX.X)
	2105H	DC-BUS Voltage (UXXX.X)
	2106H	Output voltage (EXXX.X)
	2107H	Current step number of Multi-Step Speed Operation
	2116H	Multi-function display (Pr.00-04)
	2201H	Pr.00-05 user-defined setting
	2203H	AUI1 analog input (XXX.XX %)
	2204H	ACI analog input (XXX.XX %)
	2205H	AUI2 analog input (XXX.XX %)
	2206H	Display temperature of IGBT (oC)
	2207H	Display temperature of heatsink (oC) (only for model 40HP
		and above)
	2208H	Digital input state
	2209H	Digital output state

4-94 Revision Nov. 2008, VLE1, SW V1.03