Delta Electronics VFD-VL manual By FWD/REV By Enable 02-25

Chapter 4 Parameters

		Pr.	Explanation	Settings	Factory	VF	VFPG	SVC	FOCPG	TQCPG	FOCPM
					Setting
				14: Brake chopper signal	0	○	○	○	○	○	○
02-16			Multi-function Output 6	15: Motor-controlled magnetic contactor output	0	○	○	○	○	○	○
			(MO4)	16: Slip error (oSL)		○	○	○	○		○
				17: Malfunction indication 1		○	○	○	○	○	○
				18: Reserved
				19: Brake chopper output error		○	○	○	○	○	○
02-17			Multi-function Output 7	20: Warning output	0	○	○	○	○	○	○
			(MO5)	21: Over voltage warning		○	○	○	○	○	○
02-18			Multi-function Output 8	22: Over-current stall prevention warning	0	○	○	○
			(MO6)	23: Over-voltage stall prevention warning		○	○	○	○	○	○
02-19			Multi-function Output 9	24: Operation mode indication (Pr.00-15≠0)	0	○	○	○	○	○	○
			(MO7)	25: Forward command		○	○	○	○	○	○
02-20			Multi-function Output 10	26: Reverse command	0	○	○	○	○	○	○
			(MO8)	27: Output when current >= Pr.02-33		○	○	○	○	○	○
02-21			Multi-function Output 11	28: Output when current < Pr.02-33	0	○	○	○	○	○	○
			(MO9)	29: Output when frequency >= Pr.02-34		○	○	○	○	○	○
02-22			Multi-function Output 12	30: Output when frequency < Pr.02-34	0	○	○	○	○	○	○
			(MO10)	31-32: Reserved
				33: Zero speed (actual output frequency)		○	○	○	○		○
				34: Zero speed with Stop (actual output frequency)		○	○	○	○		○
				35: Fault output option 1 (Pr.06-22)		○	○	○	○	○	○
				36: Fault output option 2 (Pr.06-23)		○	○	○	○	○	○
				37: Fault output option 3 (Pr.06-24)		○	○	○	○	○	○
				38: Fault output option 4 (Pr.06-25)		○	○	○	○	○	○
				39: Reserved
				40: Speed attained (including zero speed)		○	○	○	○		○
				41: Reserved
	02-23		Multi-output Direction	0 ~ 65535	0	○	○	○	○	○	○
02-24			Serial Start Signal Selection	0: by FWD/REV	0	○	○	○	○		○
				1: by Enable
02-25			Desired Frequency Attained	0.00 ~ 120.00Hz	60.00/	○	○	○	○		○
			1		50.00
02-26			The Width of the Desired	0.00 ~ 120.00Hz	2.00	○	○	○	○		○
			Frequency Attained 1
02-27			Desired Frequency Attained	0.00 ~ 120.00Hz	60.00/	○	○	○	○		○
			2		50.00
02-28			The Width of the Desired	0.00 ~ 120.00Hz	2.00	○	○	○	○		○
			Frequency Attained 2
02-29			Brake Release Delay Time	0.000~65.000 Sec	0.250	○	○	○	○	○	○
			when Elevator Starts
	02-30		Brake Engage Delay Time	0.000~65.000 Sec	0.250	○	○	○	○	○	○
			when Elevator Stops
02-31			Turn On Delay of Magnetic	0.000~65.000 Sec	0.200	○	○	○	○	○	○
			Contactor between Drive
			and Motor
02-32			Turn Off Delay of Magnetic		0.200	○	○	○	○	○	○
			Contactor between Drive	0.000~65.000 Sec
			and Motor
02-33			Output Current Level Setting	0~100%	0	○	○	○	○	○	○
			for External Terminals
02-34			Output Boundary for	0.00~+-120.00Hz (it is motor speed when using with PG)	0.00	○	○	○	○	○	○
			External Terminals
02-35			Detection Time of	0.00~10.00 Sec	0.00	○	○	○	○	○	○
			Mechanical Brake

4-6 Revision Nov. 2008, VLE1, SW V1.03