Note The option port is case sensitive. If it contains spaces, it must be bounded by quotes (e.g., ismPortEnable "Cable 1"). A reboot is required to activate changes made with this command. This reboot will be disruptive and will cause the affected switch chips to be reset and have a part of their EEPROM to be reloaded.
ismPortSetSpeed
Allows the user to view and set port speeds.
Syntax:
ismPortSetSpeed port [speed]
Options:
Port name.
-speed
The port speed (1=SDR, 2=DDR, 3=AutoNegotiate).
Sample Output:
S3BL08b link speed is AUTO NEGOTIATE.
Note The option port is case sensitive. If it contains spaces, it must be bounded by quotes (e.g., ismPortSetSpeed "Cable 1"). Using this command with only the port option displays its current values. A reboot is required to activate changes made with this command. This reboot will be disruptive and will cause the affected switch chips to be reset and have a part of their EEPROM to be reloaded.
ismIslSet12x
Allows the user to view, set and unset the chassis link width to 12X (except external ports).
Syntax:
ismIslSet12x [enable12xBit]
Options:
-enable12xBit
1=enable, 0=disable.
Sample Output:
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
|
| ||
|
|
