Note If there are multiple spine modules, the user can select all applicable slots.
Step 4 From the Image to Overwrite
Step 5 In the Firmware Update Package: text box, enter the path to the alternate firmware file. If the path is not known, the user can use the Browse... button to locate it.
Step 6 To have the new image become active after the next reboot, check the box in the Boot? Column. Step 7 Click the Update Firmware button.
Note Before using the Browse... button, make certain that the browser can connect to the server where the firmware files reside.
LDAP Configuration
Figure 2-32 LDAP Configuration Button
The lightweight directory access protocol (LDAP) configuration feature allows the user to set and configure authentications for the switch. The LDAP service resides on a server that has access to a user code and password database.
On a SFS 7012 with LDAP enabled, when a user attempts to login to either Chassis Viewer or the CLI, the LDAP client intercepts the login attempt and rather than authenticating internally, encrypts and packages the information in an LDAP packet and sends it to a
When LDAP is disabled internal authentication becomes the default.
To setup LDAP authentication:
Step 1 From the menu, select Maintenance.
Step 2 Click LDAP Configuration. The LDAP Authentication screen is displayed.
Figure 2-33 LDAP Authentication Screen
|
|
| Step 3 | In the LDAP Server IP Address box, enter the address of the applicable LDAP server. | |
|
|
| Step 4 | In the LDAP Server Port box, enter the applicable server port number (the default is 389). | |
|
|
| Step 5 | When finished, click the Apply button. | |
|
|
| Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide | ||
|
|
| |||
|
|
|
| ||
|
|
|
| ||
