
Options:
None.
Sample Output:
usernamerole
operator1operator
USERIDadmin
Bobadmin
loginMode
Change the login authentication mode.
Syntax:
loginMode [mode]
Options:
[mode]
Sample Output:
Mode successfully changed to: 1 = Password is not required
NOTES: This sets the authentication for the CLI. By disabling logins altogether the user is logged in the admin account by default. There is no way to modify this default.
setldapSvrIpAddr
Modify the LDAP Server IP Address.
Syntax:
setldapSvrIpAddr [ipaddress]
Options:
[ipaddress]
The IP address of the ldap server you wish to set to authenticate in the format "192.168.0.1"
Sample Output:
NOTES: This sets the LDAP server ip address. The LDAP server will be contacted for remote authentication.
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
|
| ||
|
|