The configuration files have been successfully backed up for a particular slot.
•CfgSrvModeDisabled
An event has occurred that has caused the slot mode to be set to disabled. The user should resolve the error and reset the mode to the proper value for the affected slot.
Note The default settings for this screen are as shown above. The user should not change the defaults unless instructed by Technical Support.
Chassis Traps
The Chassis Trap Control screen allows the user to set default trap scenarios related to SFS 7012.
Figure 2-53 Chassis Trap Control
Step 1 Click Chassis.
Step 2 Click Chassis Traps
Step 3 Click Trap Control. The Chassis Trap Control screen is displayed.
Figure 2-54 Chassis Trap Control Screen
| Step 4 | Select or deselect the desired trap(s). | |||||
|
|
|
|
| |||
|
| Note | To generate an immediate trap, click the applicable Gen Trap button. | ||||
|
|
| |||||
| Step 5 | To save settings, click on Apply. | |||||
|
|
|
| Following are definitions for each chassis trap: | |||
|
|
|
| Chassis Group | |||
|
|
|
| icsChassisTrapSystemSelfTestFailure | |||
|
|
|
| Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide |
|
| |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
| ||||
