B-34
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
OL-8787-05
Sample Output:
NOTES: This command allows the user to set the next boot image for t he device. A '*' next to the
image entry indicates the currently selected bootimage. A '#' indicates the currently active
bootimage.
SubnetManagement
Note The Subnet Management CLI commands are not curren tly supported.
smControl
Starts and stops the embedded subnet manager.
Syntax:
Options:
Sample Output:
smConfig
Configure startup parameters of the embedded subnet manager.
-> bootSelect 105 -noprompt
Currently installed firmware versions
index : alias : version
--------------------------
*# 1 : image1 : 4.1.1.1.11;
2 : image2 : 3.4.0.11.3;
* - indicates Default image (will run at next reboot)
# - indicates Active image
Default boot image index = 1
smControl start | stop | restart | status
Start
Start the SM.
Stop
Stop the SM.
restart
Restarts the SM.
status
Prints out the SM Status.
-> smControl start
Starting the SM...