B-52
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
OL-8787-05
Options:
Sample Output:
NOTES: This is an interactive command to configure log settings. This involves setting which log
levels are active.
Definitions:
–
Preset: Enable or disable each log level that may be generated on the system
–
Device: Enable a device to display or process log messages of each level.
–
Syslog: Configure the syslog host ip address and port.
logResetToDefaults
Restores the log file default settings.
Syntax:
Options:
None.
-> logConfigure
Type Q or X to exit.
Please enter the number corresponding to what you want to configure.
index : name : description
--------------------------
1 : Device : Logging device. (IE. Ram, syslog, etc)
2 : Preset : General log filter.
Select: 1
Configurable devices
index : name : |D|F|E|A|W|P|C|I|P|1|2|3|4|5|
----------------------------------------------------
1 : Ram : |X|X|X|X|X|X|X|X|X| | | | | |
2 : BriefRam : | | | | | | | | | | | | | | |
3 : Console : |X|X|X|X|X|X|X|X|X| | | | | |
4 : Trap : |X|X|X|X|X| | |X| | | | | | |
5 : Syslog : |X|X|X|X|X|X|X|X|X| | | | | |
Type Q or X to exit
Enter the device index you wish to configure: 5
Level: Dump [1]
Level: Fatal [1]
Level: Error [1]
Level: Alarm [1]
Level: Warning [1]
Level: Partial [1]
Level: Config [1]
Level: Info [1]
Level: Periodic [1]
Level: Debug1 [0]
Level: Debug2 [0]
Level: Debug3 [0]
Level: Debug4 [0]
Level: Debug5 [0]
Log device configuration changed
logResetToDefaults
None.