Cisco Systems SFS 7012 LogSyslogConfig -h xxx.xxx.xxx.xxx -p xxxx -f, Facility, LogShowConfig

Sample Output:

-> logResetToDefaults

Log configuration has been reset

logSyslogConfig

Configure the syslog host IP address.

Syntax:

logSyslogConfig [-h xxx.xxx.xxx.xxx] [-p xxxx] [-f xx]

Options:

-h ip_address

Sets the host IP address in dotted decimal format (xxx.xxx.xxx.xxx).

-p port

The host port number on which the syslog server is listening.

-f facility

The syslog facility to use in the messages.

Sample Output:

-> logSyslogConfig -h 172.26.0.202

Successfully configured the syslog host

NOTES: The device can forward its log messages to a syslog host if configured. This command allows a user to configure the host and port to send messages to and the facility to use in the messages. Additional configuration may be necessary to fully configure the log system.

logShowConfig

Display the current log configuration settings.

Syntax:

logShowConfig

Options:

None.

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

OL-8787-05 B-53