Cisco Systems SFS 7012 manual IsmShowPStatThresh

Note This command works only on chassis supporting DDR links. This command sets inter-switch link speeds to either 2.5, 5.0, or AutoNegotiate. External ports remain configured to SDR rate (2.5) and do not require special cabling configuration to function correctly. Using this command without the option enable12xBit displays the current values of the port. A reboot is required to activate changes made with this command. This reboot will be disruptive and will cause the affected switch chips to be reset and have a part of their EEPROM to be reloaded.

ismShowPStatThresh

Displays the port statistic thresholds.

Syntax:

ismShowPStatThresh

Options:

None.

Sample Output:

->	ismShowPStatThresh
	Field	Threshold	Time Unit
	-----	---------	---------
1	portXmitData:	0	(Percent of Max)
2	portRecvData:	0	(Percent of Max)
3	portXmitPkts:	0	(Percent of Max)
4	portRecvPkts:	0	(Percent of Max)
5	portXmitWait:	0	(1 Second)
6	portSymbolErr:	0	(1 Second)
7	portLinkErrRecv:	0	(1 Second)
8	portLinkDowned:	0	(1 Second)
9	portRecvErr:	0	(1 Second)
10	portRecvRemPhysErr:	0	(1 Second)
12	portXmitDiscard:	0	(1 Second)
13	portPKeyViolIn:	0	(1 Second)
14	portPKeyViolOut:	0	(1 Second)
15	portRawViolIn:	0	(1 Second)
16	portRawViolOut:	0	(1 Second)
17	portLocalLinkInteg:	0	(1 Second)
18	portExcBufferOverrun:	0	(1 Second)
19	portRelayedVL15Dropped:	0	(1 Second)
20	portLocalVL15Dropped:	0	(1 Second)
21	portNonSMPDropped:	0	(1 Second)

Note The following are the available port statics thresholds:

–1 portXmitData: 32-bit data words transmitted

–2 portRecvData: 32-bit data words received

–3 portXmitPkts: data packets transmitted

–4 portRecvPkts: data packets received

–6 portSymbolErr: a 8B10B encoding violation, or a displarity violation was detected

–7 portLinkErrRecv: link error recovery process happened successfully

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

B-66 OL-8787-05