English
Troubleshooting
The TV does not operate properly.
The remote control
does not work
■Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV.
■Ensure that the batteries are installed with correct polarity (+ to +, - to
■Ensure that the correct remote operating mode is set: TV, STB etc.
■Install new batteries.
Power is suddenly | ■ Is the sleep timer set? |
turned off | ■ Check the power control settings. Has the Power supply been |
interrupted? | |
| ■ Is Auto sleep activated on this station? |
The video function does not work.
■ Check whether the TV is switched on.
■ Try another channel. The problem may be with the broadcast. ■ Is the power cord inserted correctly into the mains?
No picture & No sound ■ Check your antenna direction and/or location.
■ Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly
after switching on
No or poor colour or
poor picture
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
■This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
■Adjust Colour in menu option.
■Allow a sufficient distance between the TV and the VCR.
■Try another channel. The problem may be with the broadcast.
■Are the video cables installed properly?
■Activate any function to restore the brightness of the picture.
■Check for local interference such as an electrical appliance or power tool.
■Station or cable channel experiencing problems, tune to another station.
■Station signal is weak, reposition the antenna to receive weaker stations.
■Check for sources of possible interference.
■Check antenna (Change the position of the antenna).
70
