Hitachi 26LD4550U, 32LD4550U, 32LD4550C Connecting with a HDMI to DVI cable, Audio In Rgb/Dvi

Connecting with a HDMI to DVI cable

English

Connect the DVI output of the PC to the HDMI IN 1(DVI) jack on the TV.

Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

AUDIO IN (RGB/DVI)

HDMI IN 1

(DVI)

Turn on the PC and the TV.

INPUT button on the remote control.Select HDMI1 input source using the

NOTE

To enjoy vivid picture and sound, connect a PC to the TV.

Avoid keeping a fixed image on the TV’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution.

There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

The synchronization input waveform for

Horizontal and Vertical frequencies are separate.

Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).

If using a sound card, adjust PC sound as required.

This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV.

DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.

If required, adjust the settings for Plug and

Play functionality.

If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN

(or HDMI/DVI IN) to display the PC output on the TV.

If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI;

(the other mode is set to Plug and Play automatically by the TV.)

DOS mode may not work depending on the video card if you use a HDMI to DVI cable.

For best picture quality, using an RGB-PC cable under 5m is recommended.

24