TRENDnet TEW-P1U1P manual Wireless Configuration, Required configuration

Wireless Configuration

The Wireless Print Server is a Wireless station, NOT access point. Like all other Wireless stations, they have 2 modes:

•Ad Hoc mode (Default)- no Access Point is used, Wireless stations communicate directly with each other.

•Infrastructure - all Wireless stations connect to the Access Point. This allows connection to both other Wireless stations and the wired LAN.

The Wireless Print Server does NOT allow both a LAN connection and "Infrastructure" mode.

In "Infrastructure" mode, connecting a LAN cable will disable the Wireless interface.

To use both the LAN and Wireless interfaces, "Ad-hoc" mode must be used.

Required configuration

	Ad-hoc Mode (Default)	Infrastructure Mode
SSID	In Ad Hoc mode, the Wireless Print	Must match the Access Point.
Default : ANY	Server will join any group with the
	same SSID.
	If there's no Ad Hoc group available in
	the environment, the Wireless Print
	Server will create a group using the
	SSID value as configured.
Channel	In Ad Hoc mode, the Print Server will	Access Point sets the Channel
Default : 11	scan all Channels to look for	used.
	compatible groups it can join. If there	Wireless stations
	is no existing Hoc group available, the
		automatically locate the
	Wireless Print Server will create the
		correct channel.
	group using its own Channel number.
WEP Settings	Must match the other Wireless stations.	Must match the Access Point.

Page 8