TRENDnet TEW-P1U1P manual Configuration, Wizard, Upgrade, Refresh, Exit

Select the desired port from the drop-down list to display the current status of the printer attached to the port. Possible states are:

•Status - On-line, Off-line, or Out of Paper

•Printing Information - Idle, Printing

If the printer is Bi-directional, and is not busy, the Configuration button will be available, allowing you to change the configuration of the attached printer. This button will be grayed out if the printer does not support this option, or if the printer is busy printing.

Configuration

Menu Equivalent: Main - Configure

This option allows you to configure the selected Wireless Print Server. See the following section for details.

Wizard

This Wireless Print Server Wizard allows you to do the basic configuration for the selected device. The screens are similar to the Wizard run from the CD-ROM, as described in Chapter 3.

Upgrade

Menu Equivalent: Main - Upgrade

This option allows you to upgrade the firmware for the selected Wireless Print Server. Before using this option, you need to obtain the .BIN file for the firmware upgrade, and copy it to the same directory as BiAdmin.

Refresh

Menu Equivalent: Main - Refresh

Select this icon to update the Wireless Print Server device listing after changing the name or IP Address.

Exit

Menu Equivalent: Main - Exit

Exit the BiAdmin program. This does not save any changes you have made; you must Save to Device on each screen.

Page 28