TRENDnet TEW-P1U1P manual TCP/IP Tab, TCP/IP Screen

TCP/IP Tab

Selecting this tab will allow configuration for the TCP/IP network protocol. The basic options are:

•Dynamic IP Address (DHCP) - The IP address is obtained automatically, from a DHCP Server on your network.

•Fixed IP Address - You must enter the IP address, Subnet Mask, and Gateway Address.

•IP Address - Select an unused IP address from the address range used on your LAN.

•Subnet Mask - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router).

•Gateway - Use the same values as PCs on your LAN (or on the same LAN segment, if you have a Router).

The TEW-P1U1P also supports the Auto-IP function. If the TEW-P1U1P is set to Dynamic IP Address, but there's no DHCP server found on the network, the TEW-P1U1P will get an IP from the range of 169.254.1.1 ~ 169.254.254.254 automatically. In this case, even though the TEW-P1U1P was initialized with an Auto-IP, it will change to DHCP whenever a DHCP server is detected.

Figure 25: TCP/IP Screen

The TCP session parameters should only be changed if advised to do so by your Network Administrator or Print Server Technical Support.

Page 31