Menus
Main Menu
Device Status | Same as Device Icon. |
Printer Status | Same as Printer Status Icon. |
Configure | Same as Configure Icon. |
Upgrade | Same as Upgrade Icon. |
Refresh | Same as Refresh Icon. |
Exit | Same as Exit Icon. |
InitDevice Menu
Reset Device | This will cause the device to reboot. This should be done after |
| making any configuration changes, or if the device stops responding |
| after some problems. |
Restore to Factory | This will restore ALL device values to their factory defaults. To |
Default | restore only the current screen, use the Set to Default button on the |
| screen. |
Attached Remote | This is used to connect to a Wireless Print Server device on another |
| LAN segment. You need to know the IP address of the remote |
| Wireless Print Server. |
| If your LAN does not have a Router, you can ignore this option. |
Connected | This option allows you to designate which LAN protocol will be used |
Protocol | for communication between the selected device and this application. |
| You should select ONE protocol only. |
Diagnostics menu
Print Test Page Use this option to print a test sheet from the selected Wireless Print Server port. The test print out will include status information.
Configuration
When the Configuration icon is clicked, or the Configure option on the Main menu is selected, a tabbed window will open. The tabs available will vary depending on the Wireless Print Server model selected. The possible tabs are:
•System
•TCP/IP
•AppleTalk
•NetBEUI
•Internet Printing
•Port
•Wireless
Page 29
