128 Bit | If selected, data is encrypted using the key before being transmitted. The |
Encryption | receiving station must be set to use 128 Bit Encryption, and have the |
| same Key value. Otherwise, it will not be able to decrypt the data. |
| Key |
| Enter the key value you wish to use. Other stations must have the same |
| key |
|
|
WEP | Options are "Open System" or "Shared Key". |
Authentication | Some Wireless cards do not support both methods. Check your Wireless |
| |
| card's documentation to determine the correct value. |
| Ensure that all Wireless stations use the same setting as the Access Point. |
|
|
Other Screens
Server Status
This screen shows server system data and the current settings for all of the other screens. It is
Printer Ports
This screen displays the current status of each port. For each port, the following data is listed:
•Connected Printer- the model name of the printer connected to the port, if the printer name is known. (If the printer is not
•Status - the current status of the printer
•Printing Information - this will show either Idle or Printing.
Logical Printers
Logical Printers (ports) can be used under Unix. For each Logical Printer, the following fields are available:
Logical Printer | Select the Logical Printer Port you wish to configure. (e.g L1) |
(Port) | Click the Get Data button to update the display with the current data |
| for the selected logical printer. |
|
|
Port | Select the Printer Port which the Logical printer will use. |
|
|
| The printer control string (in hex) to be sent to the printer before |
| each print job. This string cannot exceed 15 characters. |
|
|
Post String | The printer control string (in hex) to be sent to the printer after each |
| print job. This string cannot exceed 15 characters. |
|
|
Convert LF to | If checked, LF (line feed) characters are changed to CR+LF (carriage |
CR+LF | return + line feed). |
|
|
Internet Printing
See Internet Mail Printing in Chapter 7 for details of this feature.
Page 46
