Delta Electronics VFD-VL manual 02-25, 02-26, 02-27, 02-28, 02-29, 02-30

Chapter 4 Parameters

Contr oller
Signal output
FW D/REV
Enable
Driv er
Multifunction
output/input
FW D/REV
Enable
Multifunction
output=15	02-31
Motor
Electr omagnetic
valv e
	no v ol tage output

Contr oller
Signal output
FW D/REV
Enable
Driv er
Multifunction
output/input
FW D/REV
Enable
Multifunction
output=15
Motor
Electromagnetic
valv e	02-31

02-25	Desired Frequency Attained 1				Unit: 0.01
Control	VF	VFPG	SVC	FOCPG FOCPM	Factory setting: 60.00/50.00
mode
02-26	The Width of the Desired Frequency Attained 1				Unit: 0.01
Control	VF	VFPG	SVC	FOCPG FOCPM	Factory setting: 2.00
mode
02-27	Desired Frequency Attained 2				Unit: 0.01
Control	VF	VFPG	SVC	FOCPG FOCPM	Factory setting: 60.00/50.00
mode
02-28	The Width of the Desired Frequency Attained 2				Unit: 0.01
Control	VF	VFPG	SVC	FOCPG FOCPM	Factory setting: 2.00
mode
	Settings		0.00 ~ 120.00Hz

Once output frequency reaches desired frequency and the corresponding multi-function output terminal is set to 3 or 4 (Pr.02-11~Pr.02-22), this multi-function output terminal will be ON.

02-29	Brake Release Delay Time when Elevator Starts					Unit:0.001
Control		VF	VFPG	SVC	FOCPG TQCPG FOCPM	Factory setting: 0.250
mode
02-30	Brake Engage Delay Time when Elevator Stops					Unit:0.001
Control		VF	VFPG	SVC	FOCPG TQCPG FOCPM	Factory setting: 0.250
mode
		Settings		0.000~65.000 Sec

Revision Nov. 2008, VLE1, SW V1.03 4-47