Delta Electronics VFD-VL manual 01-22, JOG Frequency Unit, 01-23

Chapter 4 Parameters

Frequency

		01-00
		Max. Output
		Frequency
		Frequency
		Setting
			accel. time			decel. time	Time
		01-12,14,16,18			01-13,15,17,19
				Accel./Decel. Time
01-22	JOG Frequency						Unit: 0.01
Control	VF	VFPG SVC FOCPG TQCPG FOCPM					Factory setting: 6.00
mode
	Settings	0.00~120.00Hz

Both external terminal JOG and key “JOG” on the keypad can be used. When the jog command is ON, the AC motor drive will accelerate from 0Hz to jog frequency (Pr.01-22). When the jog command is OFF, the AC motor drive will decelerate from Jog Frequency to zero. The used Accel./Decel. time is set by the Jog Accel./Decel. time (Pr.01-20, Pr.01-21).

The JOG command can’t be executed when the AC motor drive is running. In the same way, when the JOG command is executing, other operation commands are invalid except

forward/reverse commands and STOP key on the digital keypad. Frequenc y

01-22

JOG frequency

	01-07
	4th output
	frequency
	setting			01-20			01-21		Time
			JO G ac celeration time			JO G dec el eration time
					JOG ac cel./dec el . time
01-23	Switch Frequency between 1st/4th Accel/decel								Unit: 0.01
Control	VF	VFPG SVC FOCPG FOCPM						Factory setting: 0.00
mode
	Settings		0.00~120.00Hz

Revision Nov. 2008, VLE1, SW V1.03 4-33