Delta Electronics VFD-VL manual Settings Control Mode

Chapter 4 Parameters

Settings			Control Mode
	VF	VFPG	SVC	FOCPG	TQCPG	FOCPM
2: Operation speed attained	○	○	○	○	○	○
3: Desired frequency attained 1 (Pr.02-25)	○	○	○	○		○
4: Desired frequency attained 2 (Pr.02-27)	○	○	○	○		○
5: Zero speed (frequency command)	○	○	○	○		○
6: Zero speed with stop (frequency command)	○	○	○	○		○
7: Over torque (OT1) (Pr.06-05~06-07)	○	○	○	○	○	○
8: Over torque (OT2) (Pr.06-08~06-10)	○	○	○	○	○	○
9: Drive ready	○	○	○	○	○	○
10: User-defined Low-voltage Detection (LV)	○	○	○	○	○	○
11: Malfunction indication	○	○	○	○	○	○
12: Mechanical brake release (Pr.02-29, Pr.02-30)	○	○	○	○	○	○
13: Overheat (Pr.06-14)	○	○	○	○	○	○
14: Brake chopper signal	○	○	○	○	○	○
15: Motor-controlled magnetic contactor output	○	○	○	○	○	○
16: Slip error (oSL)	○	○	○	○		○
17: Malfunction indication 1	○	○	○	○	○	○
18: Reserved
19: Brake chopper output error	○	○	○	○	○	○
20: Warning output	○	○	○	○	○	○
21: Over voltage warning	○	○	○	○	○	○
22: Over-current stall prevention warning	○	○	○
23: Over-voltage stall prevention warning	○	○	○	○	○	○
24: Operation mode indication (Pr.00-15≠0)	○	○	○	○	○	○
25: Forward command	○	○	○	○	○	○
26: Reverse command	○	○	○	○	○	○
27: Output when current >= Pr.02-33	○	○	○	○	○	○
28: Output when current < Pr.02-33	○	○	○	○	○	○
29: Output when frequency >= Pr.02-34	○	○	○	○	○	○
30: Output when frequency < Pr.02-34	○	○	○	○	○	○
31-32: Reserved
33: Zero speed (actual output frequency)	○	○	○	○		○
34: Zero speed with Stop (actual output frequency)	○	○	○	○		○
35: Fault output option 1 (Pr.06-22)	○	○	○	○	○	○
36: Fault output option 2 (Pr.06-23)	○	○	○	○	○	○
37: Fault output option 3 (Pr.06-24)	○	○	○	○	○	○
38: Fault output option 4 (Pr.06-25)	○	○	○	○	○	○
39: Reserved
40: Speed attained (including zero speed)	○	○	○	○		○
41: Reserved

Settings	Functions	Descriptions
0	No Function
1	AC Drive Operational	Active when there is an output from the drive or RUN
		command is ON.

2Operation speed attained Active when the AC motor drive reaches the output frequency setting.

Revision Nov. 2008, VLE1, SW V1.03 4-43