You can create your own tones using the Nokia Sound Converter or Nokia PC Composer application included in the Nokia PC Suite software. See page 6.

Enhancement settings

You can define the settings that the phone uses by default when it is connected to a compatible headset, car kit, or inductive loopset. This menu is shown only if the phone has been connected to one of these accessories at least once.

To access this menu, press Menu in standby mode, and select Settings and Enhancement settings.

Select Headset, Handsfree or Loopset, if the corresponding accessory has been used with the phone. Select

Default profile to select the profile that is automatically activated when you connect the selected accessory to the phone. You can select another profile while the accessory is connected.

Automatic answer to set the phone to automatically answer an incoming call after five seconds. If Incoming call alert is set to Beep once or Off, automatic answer cannot be used.

Lights to set the lights permanently on (On) or to remain on for 15 seconds after a keypress (Automatic). This setting is available only when Handsfree is selected.

Security settings

To access this menu, press Menu in standby mode, and select Settings and Security settings.

When security features that restrict calls are in use (call restrictions, closed user group, and fixed dialing), calls still may be possible to the official emergency number programmed into your phone.

Press Menu, and select Settings and Security settings. Select

Code in use to set the phone to use the UPIN or PIN code. The UPIN code option is shown only if a USIM card is inserted into the phone.

PIN code request (or UPIN code request, depending on the Code in use setting) to set the phone to ask for the PIN code of the SIM card (or the UPIN code of the USIM card) when the phone is switched on.

Some cards do not allow this setting to be changed.

Nokia 6651 User Guide

63

Copyright © 2004 Nokia

Page 73
Image 73
Nokia 6651 manual Enhancement settings, Security settings, Some cards do not allow this setting to be changed