Delta Electronics VFD-VL manual 08-03, 08-04, 08-05, 08-06, 08-07, 08-08, 08-09, 08-10

Chapter 4 Parameters
08-03	Rated Speed of Motor (rpm)					Unit: 1
Control	FOCPM				Factory setting: 1710
mode
	Settings		0 to 65535
It is used to set the rated speed of the motor and need to set according to the value indicated
on the motor nameplate.
08-04	Number of Motor Poles
Control	FOCPM				Factory setting: 4
mode
	Settings		2 to 96
It is used to set the number of motor poles (must be an even number).
08-05	Rs of Motor				Unit: 0.001
Control	FOCPM				Factory setting:	0.000
mode
	Settings		0.000~65.535Ω
08-06	Ld of Motor				Unit: 0.1
Control	FOCPM				Factory setting: 0.0
mode
08-07	Lq of Motor				Unit: 0.1
Control	FOCPM				Factory setting: 0.0
mode
	Settings		0.0~6553.5mH
08-08	Reserved
08-09	Angle between Magnetic Field and PG Origin				Unit: 0.1
Control	FOCPM				Factory setting:	360.0
mode
	Settings	0.0~360.0°
This function is used to measure the angle between magnetic field and PG origin.
08-10	Magnetic Field Re-orientation
Control	FOCPM				Factory setting: 0
mode
	Settings	0		Disable
		1		Enable

4-84 Revision Nov. 2008, VLE1, SW V1.03