Delta Electronics VFD-VL manual Operation and Start Up

Chapter 3 Operation and Start Up

Settings of Pr.02-	14: Reserved
01~02-08	15: operation speed command form AUI1
	16: operation speed command form ACI
	17: operation speed command form AUI2
	18: Emergency Stop (07-28)
	19-23: Reserved
	24: FWD JOG command
	25: REV JOG command
	26: Reserved
	27: ASR1/ASR2 selection
	28: Emergency stop (EF1) (Motor coasts to stop)
	29-30: Reserved
	31: High torque bias (by Pr.07-21)
	32: Middle torque bias (by Pr.07-22)
	33: Low torque bias (by Pr.07-23)
	34-37: Reserved
	38: Disable write EEPROM function
	39: Torque command direction
	40: Enable drive function
	41: Reserved
	42: Mechanical brake
	43: EPS function

Refer to Pr.02-13~02-22 for setting external output terminals MO1~MO10.

Settings of Pr.02-	0: No function
13~02-22	1: Operation indication
	2: Operation speed attained
	3: Desired frequency attained 1 (Pr.02-25)
	4: Desired frequency attained 2 (Pr.02-27)
	5: Zero speed (frequency command)
	6: Zero speed with stop (frequency command)
	7: Over torque (OT1) (Pr.06-05~06-07)
	8: Over torque (OT2) (Pr.06-08~06-10)
	9: Drive ready
	10: User-defined Low-voltage Detection (LV)
	11: Malfunction indication
	12: Mechanical brake release (Pr.02-29, Pr.02-30)
	13: Overheat (Pr.06-14)
	14: Brake chopper signal
	15: Motor-controlled magnetic contactor output
	16: Slip error (oSL)
	17-18: Reserved

3-6 Revision Nov. 2008, VLE1, SW V1.03