XG2600 Hardware GuideChapter 2 Installation
Precautions
Cable length will be as below based on the specification of the optical fiber cable.
Type | Core/Cladding Diameter | Minimum Transimission Band | Cable Length (m) |
MMF | 62.5/125∝m | 160MHz/km | 26 |
|
|
|
|
|
| 200MHz/km | 33 |
| 50/125∝m | 400MHz/km | 66 |
|
|
|
|
|
| 500MHz/km | 82 |
|
| 2000MHz/km | 300 |
|
|
|
|
Use the appropriate cable according to the installation place.
Replacing SFP+ Module
Precautions
It is possible to install/replace SFP+ module with the power on.
When replacing SFP+ module, follow the process below.
1.Make the replacing SFP+ slot to the "disable status".
•In case of using telnet or console
Enter replacing SFP+ slot number in <port>
#offline ether <port>
•In case of using www browser
Make the SFP+ slot number to the selective status by "Setting of physical port" of settings menu. Select "Disuse" of "Use of Physical Port", and click "Regist" icon.
Reference
Refer below for how to display top page of the switch.
★User’s Guide にもし8 章に”Using the Web Interface” を記載するのになったらリンクする
"1.2 本装置のトップページを表示させる" (pg.9)
2.Replace the SFP+ module after removing optical cable, and then install the SFP+ module.
47 | Connecting the Equipment |
