Fujitsu XG2600 manual Connecting a Setup PC, Necessary Hardware / Software, Connect RS232C Cable

XG2600 Hardware Guide Chapter 2 Installation

2.4Connecting a Setup PC

This is to connect a set up PC to the console port of the switch using RS232C cable.

Necessary Hardware / Software

Please prepare the hardware & software specified below to connect to the switch.

•Personal Computer

1 unit of personal computer for setting up configuration is required.

•RS232C cable (Cross, D-SUB9 pin)

RS232C cable is required to connect the set up PC to the switch.

Also, please use the console cable which is included in this product for connection.

Reference User’s Guide "1.1.5 Console Port Specifications" (pg.28)

•Communication Software Terminal software is required.

Connect RS232C Cable

1.Confirm power of both the PC and the switch are off.

2.Connect the RS232C cable and the console cable which is included in this product, and firmly fix them with the screw.

3.Plug in the RJ45 plug of the console cable to the console port of the switch.

Precautions

Please use cross cable for RS232C cable.

50 Connecting a Setup PC