XG2600 Hardware Guide | Chapter 2 Installation |
|
|
Caution
•Do not install PSUs to face the front side of the rack. They do not work properly.
•Before installing the switch in the rack, check if the airflow direction of the fans is correct. If the air flows incorrectly, it may cause failure to the switch
The diagram below shows in which slots PSUs need to be installed and airflow direction of the fans.
: Installing
| Power Supply Unit |
|
| Fan Unit |
| ||
Switch Interface Side | Switch Fan Unit Side | FAN1 Slot | FAN2 Slot | ||||
PSU1 Slot | PSU2 Slot | PSU1 Slot | PSU2 Slot | Installation | Airflow | Installation | Airflow |
| | – | – | | Intake | | Intake |
|
|
|
|
|
|
|
|
The LED lights in a correct configuration as follows:
|
|
|
|
|
| Power Supply Unit |
| Switch Fan Unit Side | ||
| Switch Interface Side |
| Switch Interface | Switch | Slot 1/Slot 2 | |||||
|
|
|
|
| Side | Fan Unit Side | ||||
|
|
|
|
|
|
| ||||
READY | CHECK | PSU1 | PSU2 | FAN | PSU1 | PSU2 | PSU1 | PSU2 | STATUS | OUTFLOW |
| POWER |
| ||||||||
|
|
|
|
|
|
|
|
| ||
Green | Off | Green | Green | Green | Green | Green | – | – | Green | Off |
|
|
|
|
|
|
|
|
|
|
|
If the LED indicators are different from the above, it may be due to the incorrect configuration of PSUs and/or Fans, or there may be failures with PSUs and/or Fans.
30 | Installation of the switch |
