XG2600 Hardware Guide

Chapter 2 Installation

 

 

Attach rack mounting brackets to the switch

1.Attach rack mounting brackets to fit either a standard front position of the rack or a offset position of the rack.

[STANDARD]

XG2600

[OFFSET]

Plug into the hole

of the device.

XG2600

Rack Mounting Clamps

Precautions

PSUs have to always be located in the rear side of the rack. If the position of PSUs is not appropriate, rack mounting brackets cannot be attached to the switch properly. Check the PSU configuration.

Install the switch in a 19" rack

The switch can be installed and operated in the EIA standard 19" rack.

Reference " Install the switch in a 19” rack" (pg.34)

41

Installation of the switch

Page 41
Image 41
Fujitsu XG2600 manual Attach rack mounting brackets to the switch, Precautions