Fujitsu XG2600 manual Cd-Rom

XG2600 Hardware Guide Chapter 1 Getting Started

•SFP+ Dummy Caps (Qty 26)

Dummy caps to prevent dust when the SFP+ slots are open and unplugged.

The dummy caps come with the switch, installed on the slots at the time of purchase.

•Rack Mounting Rails (1 set)

Rails for mounting the switch in a rack.

•M6 Countersunk Screws (Qty 4)

Screws for fastening the rack rails to the front side of the rack.

•M6 Machine Screws (Qty 6) 4 screws for fastening the rack rails to the rear side of the rack, and 2 screws for fastening the switch (rack mounting brackets attached to the side of the switch) to the front side of the rack).

•	CD-ROM	It contains the Firmware and User Guid e (in a PDF format) necessary for operating and
		con￿guring the switch. Adobe Reader is required for viewing.
•	EULA	End User License Agreement for the Product

Note • USB memory is not included in the product package

1.1.2Installation of Switch: Front Access or Rear Access (User Con￿gured Air￿ow)

There are two options available to install the switch in a di￿erent direction in a rack that helps suppress heat interference, depending on user’s requirements

Reference See "2.2.1 Decide Switch Access Con￿guration" (pg.29) for the detailed instructions for installation.

•Rear-Access Con￿guration (Factory Default)

The interface side (SFP+ slots) is fa cing backward in a rack, which serves better for connecting the switch to equipment whose interface side is also located in the backside of the rack such as servers.

•Front-Access Con￿guration (User Con￿gured)

The interface side (SFP+ slots) is facing forward in a rack, which serves better for connecting the switch to equipment whose interface side is facing forward such as other switches, routers, etc.

Choose either of the above to install the switch in the rack, depending on user’s requirements.

17 Items in the Package / Names and Functions