Fujitsu XG2600 manual Rear-Access Configuration Factory Default

XG2600 Hardware Guide Chapter 2 Installation

2.2.2Rear-Access Configuration (Factory Default)

This section describes how to install switch in Rear-Access configuration (Factory Default).

Decide positions for rack mounting brackets

1.Decide positions of rack mounting brackets.

It is possible to install the switch either in a standard front position of the rack or in an offset position of the rack. In case to locate the switch offset from the front side, change the positions of rack mounting brackets.

[STANDARD]

[OFFSET]

Plug into the

hole of the device.

Rack Mounting Clamps

33 Installation of the switch