XG2600 Hardware Guide | Chapter 2 Installation |
|
|
2.3.3Connecting Twisted Pair Cable / SFP+ Module
Below is how to connect twisted pair cable and SFP+ module.
Use straight cable when connecting with routers and terminals. Use crossing cable in case of cascading connection with other switching HUBs with transmission mode at fixed setting other than auto negotiation.
straight cable
optical cable
crossing cable
Management port of the switch is set auto negotiation enable by default. (However, SFP+ slots only support 10Gbps full duplex mode fixed setting.)
Ports automatically apply to the maximum speed that plugged equipment supports by the auto negotiation function.
• | : Up to maximum 100Mbps full duplex mode |
Connecting Twisted Pair Cable
Insert twisted pair cable to
Twisted Pair Cable
Precautions
•Usable twisted pair cables are unshielded twisted pair cable (UTP) over category 5E and shielded twisted pair cable (STP).
•Discharge twisted pair cable before connecting as twisted pair cable may be charged static electricity. Refer "2.3.1 Discharging Twisted Pair Cable" (pg.42) for discharging method.
45 | Connecting the Equipment |
