Antenna Installation
Attach the antenna by turning clockwise into the antenna receptacle on top of the radio.
Installing and Removing the Battery Pack
Hold the radio face down in your hand. To attach the battery pack, pick up the pack by the sides and hold it so that the latch is facing upward. Place the bottom of the battery pack into the base of the radio at approximately a 45o angle. Gently push battery into the radio back until the battery latch snaps firmly into place.
Remove the battery pack by holding the radio face down
in your hand. Press down and hold the battery latch. Holding the latch with your finger gently pull battery out and away from radio.
Attaching and Removing the Belt Clip
The belt clip attaches to the radio's battery pack. To attach the belt clip, hold the clip and slide it into the recessed area at the top of the pack. A click will verify the clip is securely positioned. To remove the clip, press and hold the release tab toward the clip while gently pulling the belt clip assembly off the radio.
5