Maxon Telecom SP-330 & SP-340 Battery Charging and Care, SP-300Series Operation, Power On-Volume

Models: SP-300 Series Synthesized Scanning Radio SP-310 SP-320 SP-330 & SP-340

1 16
Download 16 pages 46.28 Kb
Page 8
Image 8
Battery Charging and Care

Battery Charging and Care

To ensure maximum performance from your radio, the battery pack must be fully charged before initial use. For continued performance, periodically discharge the battery completely and then fully recharge the pack. Proper care and charging will extend life of your battery pack.

Maxon offers two chargers for use with the SP-300 Series radio. Each model is sold separately and is available through your original purchasing Dealer.

The QPA-1135 Pedestal Charger provides a slow overnight charge of 12-16 hours. The charger has a single well which charges a radio with battery attached.

The QPA-1130 Desktop Charger provides quick charging in 1.5 hours and normal "slow" charging. The charger has two wells, one will accommodate a radio with battery attached; the other is for a battery removed from the radio.

Refer to the instructions accompanying each of these Maxon chargers for more information.

SP-300 Series Operation

Power On-Volume

Turn the radio on by rotating the on /off - volume control clockwise until you hear a click and the self test "alert" tone.

Transmit

CAUTION

OPERATION OF THE TRANSMITTER WITHOUT A PROPER ANTENNA INSTALLED MAY RESULT IN PERMANENT DAMAGE TO THE RADIO

1)Press the monitor button to monitor the channel for activity. To avoid interrupting another user, make sure the channel is clear before you begin transmitting.

6

Page 8
Image 8
Maxon Telecom SP-330 & SP-340, SP-320, SP-310 Battery Charging and Care, SP-300Series Operation, Power On-Volume, Transmit