HX-5
User’s Guide
Section 1 - Introduction
The MaxTech
The package contains the following items: |
|
• Hub | • Power adapter |
• User’s Guide | • Mounting plate and screws |
Section 2 - Installation
1.Locating the Hub - Place the hub in a location central to your networked computers, or within the maximum cable length (328 ft.) to the farthest computer. It can be placed on a desk or it can be mounted on a wall by using the included mounting plate and screws.
2.Connecting the Power Adapter - Insert the round end of the power adapter cord into the hub’s DC Input connector (See Figure 1). Plug the transformer end of the power adapter into a 120V power outlet. The hub is powered on when this connection is made.
Note: The hub performs a
3.Connecting Workstations - Connect one end of an unshielded
Figure 1 - HUB Connectors
|
|
|
|
|
| |
DC | Crossover |
|
|
|
|
|
Power In | Port |
|
| |||
| 5 | 5 | 4 | 3 | 2 | 1 |
INPUT DC | CROSSOVER |
|
|
|
|
|
POL/RX
COLLISIONPOWER 5 4 3 2 1
LINK/TX
Part #MAN065 Rev. 1.0 | 1 | HUB005 |