MaxTech HX-5 manual Appendix A - Specifications, Appendix B - 10 Base-T Cable Requirements

Appendix A - Specifications

Network Standard:	IEEE 802.3 Ethernet 10Base-T
Transfer rate:	10 Mbps
Topology:	Star
Max. cable length:	328 ft. (100 meters)
Ports:	5 RJ-45 jacks
Crossover connector: 1 (port 5)
Auto-partition:	Yes
Polarity correction:	Yes
Dimensions:	5.1” x 3.4” x 1.1”
Weight:	6 oz.
EMI/RFI:	FCC Part 15 Class A
Temperature:	0° C to 45° C (operating); -40° C to 70° C (storage)
Humidity:	10% to 80% (operating, non-condensing); 5% to 90%
	(storage)
Power:	7W, 120VAC

Appendix B - 10 Base-T Cable Requirements

10Base-T networks use unshielded twisted-pair cable and 8-pin RJ-45 modular con- nectors. Use 22-26 AWG, 2- or 4-pair, 100 ohm/ft UTP Category 3 or better cable. The cable must use solid copper conductors and UL codes CM, CMR, and CMP are required. Maximum cable length from hub to workstation is 328' (100 m).

Appendix C - Technical Support

In the unlikely event you experience difficulty in the use of the product, or if it does not operate as described, we suggest you: (1) check the Link status LED, (2) check for the proper cable type (category 3), (3) check that the port has not been disabled by the hub due to excessive collisions or (4) consult with your dealer.

If you still cannot resolve the problem, call the MaxTech Service Center at (201) 586-8686 between 8:00 a.m. and 8:00 p.m. (EST Monday through Friday). If the nature of your question is related to the network operating system that you are using, refer to its manual. Calling the Service Center without complete and accurate information concerning the nature of the problem will be both time- consuming and frustrating for you.

You may also reach us through:

24 hour BBS - (201) 586-8866 Compuserve ID - 71333,44 Prodigy - Jump: Manufacturers BB Email - support@maxcorp.com

24 hour Faxback - (201) 586-8761 America Online - Keyword: Maxtech World Wide Web - www.maxcorp.com FTP - ftp.maxcorp.com

Appendix D - Five Year Limited Warranty

MaxTech warrants to the original buyer of this product against defects in material and workmanship for five years from the date of purchase. During the warranty period, MaxTech will repair (or at its option, replace) the product that proves to be defective, provided the product has not been abused, misused, modified, or re-

3