Maxtor 7B300S0 manual MaXLine III Sata Hard Disk Drive Family, Attaching Sata Power Cables

					QUICKSPECS
MaXLine III SATA Hard Disk Drive Family
CAPACITIES:
MODEL	ACT CYLS	HDS:SECT	MAX CYLS	MAXLBA	GB CAPACITY
7B250S0	486,344	16:63	16,383	490,234,752	250GB
7B300S0	588,422	16:63	16,383	593,129,376	300GB
SATA = Serial ATA

Attaching SATA Power Cables:

PLEASE NOTE: Unlike standard ATA drives, Serial ATA drives DO NOT require the use of jumpers to configure the drive. Please disregard any references to jumper settings and Master, Slave and Cable Select

configurations in the Maxtor Installation Guide.

Key Features:

•SATA interface

•Burst Data Transfer Speeds up to 150 MB/sec

•Up to 300GB capacities

•9.3 ms average seek time

•16MB Cache Buffer

•100% FDB Motors

•7200 RPM

Misc Drive Info:

For more information on step-by-step installation procedures, troubleshooting procedures and more go to the Maxtor.com Knowledge Base.

GB = 1 billion bytes. Total accessible capacity varies depending on operating environment.

SATA Interface Cable Requirements:

7-pin Serial ATA interface cable (Gen. 1- or Gen. 2-compliant) up to 1 meter in length.

Document #: 42104	Rev: 00
Date: 6/21/04