GPV800.2 / GPV1100.2 / GPV3500.2 2-CHANNEL AMPLIFIER APPLICATIONS

Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system

In this application we will use a 2 channel amplifier for the high frequencies, and a second one for the low frequencies, or mono sub bass. Please consult the speaker specifications to determine maximum amplifier power requirements.

Interconnect cable checklist:

Connect the inputs of the HIGHS amplifier to a Radio/CD with good quality RCA cables. Connect the LINE OUT of the HIGHS amplifier to the inputs of the BASS amplifier with a stereo RCA to RCA cable.

Mono bass woofer wiring:

Connect the mono speaker positive terminal to the RIGHT +, and its negative terminal to LEFT -.

Switch setting checklist:

-Highs amplifier: X-OVER switch in the HPF position. MODE switch in the STEREO position.

-Lows amplifier: X-OVER switch in the LPF position. MODE switch in the MONO position.

Crossover frequency control checklist:

Highs amplifier:

-HI PASS: 100 Hz

-LOW PASS: N/A

Lows amplifier:

-HI PASS (Subsonic filter): 10 Hz to 40 Hz

-LOW PASS: 80 Hz

Please note that these frequency points are suggestions only. Refer to the loudspeaker manufacturer specifications and the section “Setting up systems after installation for best performance”

Level control checklist:

-Refer to the section “Setting up systems after installation for best performance”

Minimum final loudspeaker impedances:

-2-Ohms per channel stereo.

-4-Ohms mono bridged.

FULL RANGE

STEREO LINE INPUT

L

LINE

 

OUT

R

LINE INPUT

INPUT

gnd - +

5V 0.2V

LEVEL

0dB 12dB

BASS EQ

60Hz 1.2KHz

HPF

30Hz 250Hz

LPF

FULL LPF HPF

X-OVER

MONO STEREO

MODE

DRIVE

GROUND POUNDER

 

+

 

FULL RANGE

SPEAKER OUTPUT

LEFT + - LEFT

BRIDGED

SPEAKERS

 

 

-

 

 

FUSE

 

 

 

 

GND REM +12V

 

TO BATTERY + 12 volts VIA FUSE

POWER INPUT

 

REMOTE TURN-ON

 

CHASSIS GROUND

 

 

 

STEREO

INTERCONNECT

RCA CABLE

R

L

LINE

R

L

LINE INPUT

HI

+ -

 

INPUT

gnd - +

 

5V 0.2V

 

LEVEL

0dB 12dB

 

BASS EQ

60Hz 1.2KHz

 

HPF

30Hz 250Hz

 

LPF

FULL LPF HPF

 

X-OVER

MONO STEREO

 

MODE

DRIVE

GROUND POUNDER

 

 

MONO BASS

 

 

SPEAKER

 

+

 

SPEAKER OUTPUT

LEFT + - LEFT

BRIDGED

 

-

 

FUSE

 

 

 

GND REM +12V

TO BATTERY + 12 volts VIA FUSE

POWER INPUT

REMOTE TURN-ON

CHASSIS GROUND

 

 

4

Page 6
Image 6
Maxxsonics GPV1800.4, GPV2400.4, GPV1100.2, GPV3500.2 manual LOW Pass N/A, Stereo Interconnect RCA Cable, Speakers, Mono Bass

GPV1200.4, GPV3500.2, GPV2400.4, GPV1800.4, GPV1100.2 specifications

Maxxsonics, a respected name in the audio industry, offers an impressive lineup of amplifiers that cater to diverse audio needs. Among their standout products are the GPV800.2, GPV2100.1, GPV1100.2, GPV1800.4, and GPV2400.4 — each offering unique features, technologies, and characteristics designed to enhance any audio experience.

Starting with the GPV800.2, this amplifier is a compact powerhouse perfectly suited for those seeking a reliable two-channel option. Its RMS output of 800 Watts ensures a strong performance and enables users to drive quality speakers. With its Class D technology, the GPV800.2 delivers high efficiency, which means less heat generation and better energy conservation. Additionally, it includes features like low-pass and high-pass filters, allowing users to fine-tune their audio output.

Next up is the GPV2100.1, a monoblock amplifier that excels in delivering maximum power to subwoofers. With an RMS power output of 2100 Watts, this model is designed for serious bass enthusiasts. Its regulated power supply ensures consistent performance, even under demanding conditions. The GPV2100.1 also features a bass boost control, allowing users to customize the low-end frequency response according to their listening preferences.

The GPV1100.2 serves as a flexible two-channel amplifier with an RMS power output of 1100 Watts. It is equipped with built-in high- and low-pass filters, making it suitable for a variety of audio setups. The GPV1100.2 is designed with a compact chassis, allowing easy installation in tight spaces while maintaining impressive sound quality. Its robust construction also contributes to enhanced durability.

The GPV1800.4 is a four-channel amplifier that combines power with versatility, delivering 1800 Watts RMS. This model is ideal for users looking to drive multiple speakers without compromising on sound quality. Its Class D design ensures efficient power management and low distortion. Additionally, the GPV1800.4 includes an adjustable crossover, enabling optimal sound tuning for any configuration.

Finally, the GPV2400.4 is the flagship four-channel amplifier from Maxxsonics, boasting an impressive RMS power output of 2400 Watts. This powerful unit is perfect for audiophiles who demand high-performance audio. With advanced circuit design and high-quality components, the GPV2400.4 offers exceptional sound clarity and low-frequency response. Its built-in protection circuitry safeguards against overheating and overloading, ensuring longevity and reliability.

In conclusion, Maxxsonics has crafted a competitive array of amplifiers, each tailored for specific audio applications while emphasizing efficiency, power, and flexibility. With models like GPV800.2, GPV2100.1, GPV1100.2, GPV1800.4, and GPV2400.4, users can find the right amplifier to elevate their audio experience to new heights.