Full Range Stereo Line Input | Maxxsonics P1-2000.1, P1-5000.5

P1-600.2 / P1-1000.2 2 CHANNEL AMPLIFIER APPLICATIONS

FULL RANGE STEREO

This is the most basic application for the P1 Series 2 channel amplifiers.

1. Interconnect cable checklist:

Connect the LINE INPUTS to the Radio/CD with good quality RCA cables.

2. Crossover Switch:

The X-OVER switch must be in the FULL position.

3.Crossover frequency control checklist: N/A for full range operation.

4. MODE:

Should be in the STEREO position.

5. Line Level:

Refer to the section “Setting up systems after installation for best performance”

NOTE: Minimum final loudspeaker impedances:

4 & 2 Ohms stereo mode or 4-Ohms mono mode

This amplifier will not do 1 Ohm stereo or 2/1 Ohm mono operation.

FULL RANGE

STEREO LINE INPUT

LINE OUT	R	L
LINE	R	L
INPUT
	INPUT	gnd - +
	6V 0.2V	LEVEL
	0dB 12dB	BASS EQ
	60Hz 12KHz	HPF
	30Hz 250Hz	LPF
	FULL LPF HPF	X-OVER
	MONO STEREO	MODE

		FULL RANGE
		SPEAKERS
SPEAKER OUTPUT		-
SPEAKER OUTPUT	BRIDGED	+-+LEFTRIGHT
		POWER PROTECT
INPUTPOWER	FUSE
INPUTPOWER	REMGNDBATT+12V	CHASSIS GROUND
		TO BATTERY +12v
		VIA FUSE
		REMOTE TURN-ON

MONO

This application illustrates the basic mono bridging method for all Crunch amplifiers.

Interconnect cable checklist:

A MONO signal source is required, such as would be available from the mono sub bass output of an active crossover, whether stand alone, or built into a head unit or equalizer. Important: Do not be tempted to connect the hot, or positive outputs, from any source together to obtain a mono signal, as this could very well damage the output stage of that source.

It is necessary to feed the SAME signal to both left and right inputs via a Y- adapter RCA cable. Connect the mono speaker positive terminal to the LEFT +, and its negative terminal to RIGHT -.

FULL RANGE
MONO LINE INPUT
VIA Y-ADAPTER	LINEOUT	R	L
FROM MONO SOURCE	LINE	R	L
FROM MONO SOURCE	INPUT
	INPUT		+
			- gnd - + INPUT
		6V 0.2V	LEVEL
		0dB 12dB	BASS EQ
		60Hz 12KHz	HPF
		30Hz 250Hz	LPF
		FULL LPF HPF	X-OVER
		MONO STEREO	MODE

Switch setting checklist:

-The AMPLIFIER X-OVER switch should be in the LPF position and the MODE should be in the MONO position.

Crossover frequency control setting checklist:

LPF: 11 o’clock

Minimum final loudspeaker impedance: - 4 ohm mono.

		MONO SPEAKER
SPEAKER OUTPUT		-
SPEAKER OUTPUT	BRIDGED	+-+LEFTRIGHT
		POWER PROTECT
INPUTPOWER	FUSE
INPUTPOWER	REMGNDBATT+12V	CHASSIS GROUND
		TO BATTERY +12v
		VIA FUSE
		REMOTE TURN-ON

The HIGH LEVEL inputs are used when the radio/CD player does not have RCA cable outputs. You can connect the radio/CD player speaker wires directly to the amplifier via the high Level Inputs.

Use this connector for 2 CH amplifiers	Use both connectors for 4 CH amplifiers
GRAY: CH 1 Speaker Input +	ORANGE: CH 3 Speaker Input +
BROWN: CH 1 Speaker input -	PINK: CH 3 Speaker input -
Black: Chassis Ground	Black: Chassis Ground
GREEN: CH 2 Speaker Input -	BLUE: CH 4 Speaker Input -
White: CH 2 Speaker Input +	YELLOW: CH 4 Speaker Input +

P1-600.4, P1-600.2, P1-1000.4, P1-2000.1, P1-5000.5 specifications

Maxxsonics is renowned for producing high-quality audio amplifiers that cater to diverse listening demands. Among their impressive lineup, the P1 series stands out, featuring models like the P1-5000.5, P1-2000.1, P1-1000.2, P1-1000.4, and P1-600.2. These amplifiers boast a blend of power, efficiency, and advanced technologies, making them favorites among audiophiles and casual listeners alike.

The Maxxsonics P1-5000.5 is a powerhouse designed for those who need significant output. It delivers a staggering 5,000 watts of peak power, making it suitable for subwoofers and large sound systems. This model features a Class D topology, ensuring high efficiency and minimal heat generation. A built-in low-pass filter allows for tailored sub-bass frequencies, enhancing the overall auditory experience.

Next in the lineup, the P1-2000.1 continues the legacy of power, providing 2,000 watts of peak power in a mono configuration. This amplifier is optimized for driving single subwoofers or multiple subwoofer setups, ensuring deep, thunderous bass response. Its frequent frequency response helps retain clarity and detail in the audio output, making it perfect for bass enthusiasts.

The P1-1000.2, with its 1,000 watts of peak power, is a versatile model designed for powering two-channel applications. Its compact design allows for easy installation while delivering impressive sound quality. Featuring a built-in crossover, users can effortlessly adjust frequency settings, making it adaptable for various speaker configurations.

For those who desire multi-channel options, the P1-1000.4 offers 1,000 watts of peak power across four channels. This makes it an excellent choice for driving a complete audio system, including front and rear speakers along with additional subwoofers. The advanced thermal management system ensures the amplifier maintains optimal performance without overheating, which is essential for long listening sessions.

Finally, the P1-600.2 is an excellent entry-level option, providing 600 watts of peak power in a compact yet efficient design. This amplifier is ideal for smaller systems, making it suitable for cars with limited space. Despite its size, the audio quality remains impressive, with clear output and dynamic range.

Overall, the Maxxsonics P1 series offers a comprehensive range of amplifiers tailored to various needs, from massive wattage for serious bass lovers to compact solutions for space-constrained environments. Each model is designed with advanced technologies and features that ensure high performance, reliability, and an exceptional listening experience. Whether you are building an intricate audio setup or seeking an upgrade, the P1 series has something to suit every audiophile's requirements.

Maxxsonics P1-2000.1, P1-5000.5, P1-600.4 P1-600.2 / P1-1000.2 2 Channel Amplifier Applications

Models: P1-600.4 P1-600.2 P1-1000.4 P1-2000.1 P1-5000.5 P1-1000.2