Installation

Note

• Some models only have adjustment screws “A.”

4.Using the hex head driver, turn each of these adjustment screws (B) to raise or lower the rear of the refrigerator.

5.Using the carpenter’s level, make sure front of refrigerator is 1⁄4” (6 mm) or 1⁄2 bubble higher than back of refrigerator and that the refrigerator is level from side to side.

6.Turn stabilizing legs (C) clockwise until firmly against floor.

7.Turn adjustment screws (A) counterclockwise to allow the full weight of the refrigerator to rest on the stabilizing legs.

8.Replace hinge cover(s).

•Position cover into the outer edge of the hinge.

•Swing the cover toward the cabinet and snap it into place.

9.Replace the toe grille.

Note

•For proper reinstallation, ensure the “top” marking on the interior of the toe grille is oriented correctly.

•Align the toe grille mounting clips with the lower cabinet slots.

•Push the toe grille firmly until it snaps into place.

Door and Drawer Removal

Some installations require door/drawer removal to transport the refrigerator to its final location.

WARNING

To avoid electrical shock which can cause severe personal injury or death, observe the following:

•Disconnect power to refrigerator before removing doors or drawer. Connect power only after replacing doors or drawer.

CAUTION

To avoid damage to walls and flooring, protect vinyl or other flooring with cardboard, rugs or other protective material.

1.Unplug power cord from power source.

2.Remove toe grille and bottom hinge

cover(s) (see page 3).

3. Remove top hinge cover from refrigerator door by removing Phillips screw and retain screw and cover for later use.

4. Unscrew 5⁄16” hex head screws from top hinge to remove hinge and retain all screws for later use.

5. Lift right side refrigerator door from

 

center hinge pin. Remove door

 

closure from center hinge pin on

right

the right side and retain for later

use.

side

door

6. Disconnect wire harness on top

closure

 

of left side refrigerator door top

 

hinge.

 

Release two-pin connector by pressing junction point with a flat blade screwdriver or fingernail.

Green ground wire remains attached to the hinge.

7.Unscrew 5⁄16” hex head screws from top hinge to remove hinge and retain for later use.

Lift left side refrigerator door, along with top hinge, from center hinge pin.

Remove center hinge pin with a 5⁄16” hex head driver and retain hinge pin for later use.

8. Remove Phillips screws to remove right and left hinges and retain all screws for later use.

9. Remove both stabilizing brackets with 3⁄8” hex head driver and retain screws for later use.

4

Page 4 Page 6
Page 5
Image 5
Maytag 12828121 Door and Drawer Removal, Right side and retain for later, Use, Disconnect wire harness on top
Page 4 Page 6

12828121 specifications

The Maytag 12828121 is a powerful and reliable washing machine designed to meet the needs of modern households. Known for its durability and advanced features, this appliance is engineered to deliver exceptional cleaning performance while ensuring user convenience.

One of the standout features of the Maytag 12828121 is its robust motor. The machine is equipped with a high-efficiency motor that not only enhances washing performance but also reduces energy consumption. This energy-saving technology makes it an environmentally friendly option while helping users save on utility bills.

The Maytag 12828121 boasts a large capacity drum, allowing it to handle substantial laundry loads with ease. This feature is particularly beneficial for families, as it reduces the number of wash cycles needed, saving time and effort. The drum is designed to accommodate bulky items such as bedding and towels, ensuring thorough cleaning without any hassle.

Another key characteristic of this washing machine is its array of washing cycles. With multiple customizable settings, including options for delicate fabrics, heavy-duty items, and quick washes, users can select the appropriate cycle for each load. The Intuitive Control Panel offers easy navigation, enabling users to select their desired settings effortlessly.

The Maytag 12828121 also incorporates advanced technologies such as the PowerWash cycle. This feature is designed to tackle tough stains and heavily soiled garments, ensuring that every load comes out clean and fresh. It combines extra cleaning action and optimal time and temperature adjustments for superior results.

Additionally, the washing machine features an efficient spinning system that maximizes water extraction, leading to shorter drying times. This is not only convenient but contributes to the longevity of clothes by minimizing wear and tear during the drying process.

Safety and durability are also central to the design of the Maytag 12828121. The machine is built with a sturdy structure and high-quality materials, ensuring long-lasting performance. Furthermore, it includes features such as a locking door mechanism for added safety during operation.

In summary, the Maytag 12828121 is an outstanding choice for anyone seeking a reliable washing machine with advanced features. Its powerful motor, large capacity, customizable washing cycles, and energy-efficient technologies combine to provide a superior laundry experience. Users can trust this appliance to deliver exceptional cleaning performance while being gentle on clothes and the environment.
Top Page Image Contents