Maytag GBMDC 709T manual Indicator lamps, Options, 5019 607

Before using the machine, please also read the instructions for use carefully!

MDC 709T Quick Reference Guide GB

Programme sequence

Programme selector knob

The drying programme is selected by turning this knob.

“Start (Pause)” button				+
The drying programme is started by pressing this button. The
indicator lamp flashes during the selection phase and lights up	Overdry		Anti-	End
during drying.		Drying
	protection		crease	of cycle

Indicator lamps

Filter

The indicator lamp lights up when the filter and/or heat exchanger need cleaning.

Clean the filter at the end of every cycle.

Water container

The indicator lamp lights up when the water container needs to be emptied. The drying cycle is automatically interrupted. Empty the container and restart the drying programme.

Empty the water container after every drying cycle.

Clean heat exchanger

The Led lights up after 30 cycles when the heat exchanger needs to be cleaned. Clean the heat exchanger. Then for reset the led indication, turn the programme selector knob to the vertical position indicated by the symbol “ ” and press the “Start (Pause)” button during 3 seconds until led switches off.

Time remaining display

Depending on the programme selected, once the drying cycle has been started, a default drying time is displayed. The time displayed is corrected by a few minutes depending on the volume, type and dampness of the laundry.

The drying time specified is a calculated value which will be updated during the drying programme.

The flashing lines indicate that the calculation is running. The remaining time will be updated.

Overdry protection

The indicator lamp lights up when a humidity controlled program is selected, to indicate the working protection function. Function is not active in time controlled programmes 10’, 20’, 30’, 40’, 60’, 90’ and “Airing”

“ ”.

Dryness adjustment

This is an option to adjust the dryness of the laundry according to your wishes. Select the desired programme and the option dryness level adjustment by pressing the button “+” for more dry or the button “-” for more humid. The selected dryness will be stored as a pre-setting to the selected drying programme. Using the drying programme next time the pre-setting appears. By pressing the dryness adjustment buttons “+” or “-” the pre-setting can be changed.

Options

Gentle

Reduces drying intensity (recommended for delicate items).

Rapid

Shortens drying duration (recommended for thin items of the same size).

Buzzer

Signals/sounds end of drying cycle.

Anticrease

Prevents laundry from creasing up to 12 hours. The automatic buzzer signal can be switch-off by selecting anti- crease.

Delayed Start (Pause)

Delays the start of the drying cycle by 1 to 12 hours.

Each time the button is pressed, the start time is delayed by 1 hour.

Then press the “Start (Pause)” button to confirm the final selection and to start the dryer.

The delayed start indicator lamp flashes and the countdown counts down in 1-hour intervals. The countdown is indicated by the indicator lamp above the button flashing. During the countdown, the drum will turn from time to time to re- distribute the laundry. To cancel or change the previously set time delay, set the index of the programme selector knob to the top, or open the door.

5019 607 00937

(Subject to technical modifications)

4