MATERIALS AND BASIC TOOLS NEEDED
Accessories
To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories depending on your type of installation. Call Maytag Customer Service at
EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLONS (7.6 LITERS), Part No. 66001013AND 5 GALLONS (18.9 LITERS), Part No. 66001014 CAPACITY.
DRAIN PANS AVAILABLE IN 22” (559 mm) DIAMETER (PART NO. 66001011) FOR WATER HEATERS HAVING A DIAMETER 20” (508
mm)OR LESS, 24” (610mm) DIAMETER (PART NO. 66001105) FOR WATER HEATERS HAVINGADIAMETER 22” (559 mm) OR LESSAND 28”(711mm)DIAMETER(PARTNO.66001012)FORWATERHEATERS HAVING A DIAMETER 26” (660 mm) OR LESS.
Tools
You may or may not need all these tools, depending on your type of installation. These tools can be purchased at your local hardware store.
•Pipe Wrenches (2) 14” (356 mm)
•Screwdriver
•Tin Snips
•6’ (1.82 m) Tape or Folding Ruler
•Garden Hose
•Drill
•Pipe Dope or Teflon Tape
DRILL
TIN SNIPS
PHILLIPS SCREWDRIVER
ROLL OF TEFLON | PIPE DOPE | |
(SQUEEZE TUBE) | ||
TAPE (USE ONLY ON | ||
USE FOR WATER AND GAS | ||
WATER HEATER | ||
CONNECTIONS | ||
CONNECTIONS) | ||
|
GARDEN HOSE | 6 FOOT TAPE | PIPE WRENCH |
Additional Tools Needed
When Sweat Soldering
•Tubing Cutters or Hacksaw
•Propane Torch
•Soft Solder
•Solder Flux
•Emery Cloth
•Wire Brushes
| PROPANE |
TUBING CUTTER | TORCH |
| ROLL OF |
HACKSAW | EMERY CLOTH |
3/4” (19 mm) WIRE BRUSH |
|
|
| ROLL OF | SOLDER |
1/2” (13 mm) WIRE BRUSH | SOFT SOLDER | FLUX |
6
