Then the TIME MONITOR will convert to the approximate total minutes remaining in the cycle, This feature lets you know when to return to the

washer to remove >'our load.

Select Options

Options are selected by pressing the pad once or canceled by pressing the pad again,

Slow Spin

Pressing this pad provides a slow spin speed on any cycle selected,

Off

Pressing this pad cancels all selections and stops the washer,

Presoak

This option provides a convenient and eeonomical

method of treating heavily soiled and stained loads, It will soak with brief periods of agitation for a

selected time and automatically advance into a wash cycle without draining,

To use this option:

1.Select a wash cycle,

2.Choose wash temperature, water level and wash time.

3.Press PRESOAK pad. (Wash water temperature

and presoak water temperature will be the same,)

4.If needed, decrease presoak time from 30 rain- utes or increase time up to 60 minutes by press- ing one of the time adjust pads. Generally, soak

periods up to 30 minutes are sufficient for most loads.

5.Use up to 50% more than the usual amomat of detergent or use a presoak product such as Biz °

in addition to the regular amount of detergent. *Brandna_r_aretheo'ademarksof &e_pective nuznufacturer_.

Extra Rinse

An additional deep rinse is automatically added to the selected cycle by using the EXTRA RINSE option. To select, press the EXTRA RINSE pad.

The water temperature will be the same as the ini- tial rinse.

Warm Rinse

Pressing this pad will provide a warm final rinse when energy saver hot, warm or energy saver warm water

temperatures are selected. A warm finn rinse cannot be provided on a permanent press cycle or when using a hot or cold wash temperature on any cycle.

Start the Washer

After a wash cycle program has been selected, the wash- er ,a411fill to the selected water level with the selected wash water temperature. After lqlling, it will agitate for

the selected nmnber of minutes.

The washer will pause briefly throughout each eyele. These pauses are normal.

This washer is designed so that it will not agitate or spin

when the lid is open. It will, however, fill with the lid open so water is available for pretreating stains or dilut- ing fabric softener.

Should the lid be opened during a eyele, the washer will stop; when the lid is dosed the washer will resmne its cycle at the point it was interrupted.

NOTE: Ifthewasher stops during the spin it maybe due to an unevenly distributed load. If this_happens, push in the controlknob, open the lid, redistribute the

load, close the lid and pull out the control knob,

Program Monitor Features

Unbalanced Signal

If the washer stops due to an unevenly distributed

clothes load, "UNBALANCED" will light in the Monitor. One minute later an audible signal will sound. This signal will continue to sonnd every minute. To con- tinue the cycle, redistribute the load and close the lid. The washer will automatically resume the cycle at the point it was interrupted.

Sequence Indicators

Words light in the Monitor as the washer advances through each portion of the %vole -- "SOAK, WASH, RINSE, X-RINSE and SPIN."

Soil Level indicators

The soil level indicators will light in the Monitor to help match the wash time to the soil level of the load. For

example, if the load is lightly soiled, agitation time can be decreased and fewer indieator lights will light indi- eating appropriate agitation time for the load.

PAGE 7

Page 8
Image 8
Maytag LAT9904 operating instructions Select Options