DURING THE PROGRAMME
If you wish to interrupt or change the
programme
Hold down the 
button for three se- conds. An extinguished LED next to the button indicates that the programme has been inter- rupted.
Add more detergent, if necessary, before se- lecting a new programme.
Putting in or taking out washing
If you wish to put in or take out washing after you have started the machine, you must hold
down the 
button for three seconds, when the LED next to the button will light. Any wa- ter will be pumped out, and the door can then be opened. Put in more washing, add more de- tergent, if necessary, and close the door. The washing programme will restart automatically from the point at which it was interrupted.
Changing settings after starting
It is possible for you to alter certain settings and options after you have started the washing programme.
Hold down the button for the setting or the option for three seconds. The temperature is shown in the display.
Within 15 seconds of releasing the button, you must index forward to the new desired set- ting.
In order to make an alteration, however, the part of the programme that you wish to alter must not have been activated yet.
-Programme – If the programme selector knob is moved when the programme is running, this
will not affect the programme. You should in- terrupt the programme instead.
-Temperature – can be altered before the main wash has started.
-Spin speed – can be altered before the water is pumped out after the main wash.
-Delayed start – cannot be altered. You should instead interrupt the programme, change the settings and restart the machine.
-Super rinse – can be altered before the water is pumped out after the main wash.
-E2 – can be altered before the start of the main wash.
16
