BEFORE YOU CALL

For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundry Tips booklet.

CHECK THESE POINTS IF

YOUR WASHER...

ALWAYS CHECK FIRST

•Plug cord into live electrical outlet.

•Check fuse or reset circuit breaker.

• If drain height is five to eight feet, a

the load down through the cleaning

high-volume pump kit may be neces-

zone for maximum cleaning effective-

sary. See installation instructions or

ness. This sound will vary from load to

call 1-800-688-9900. If the drain height

load. This is normal.

is over eight feet, water may not be

• Operating sounds will vary depending

removed, even with the high volume

on agitation speed.

pump kit.

 

WON’T FILL

•Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

•Turn both faucets on fully.

•Straighten inlet hoses.

•Disconnect hoses and clean screens. Hose filter screens may be plugged at the faucet.

WON’T AGITATE

•Make sure the lid is completely closed.

•Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

•Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

•The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.

•Pauses are normal. Wait and see if the washer will start again.

WON’T SPIN OR DRAIN

•Straighten drain hoses. Eliminate kinked hoses. If there is a drain restric- tion, call for service.

•Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.

•The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop operations for your safety. Call for service.

LOAD IS WETTER THAN NORMAL AT THE END OF THE CYCLE

•The washer is designed to reduce spin speed if an unbalanced load is detected. This is normal.

•Redistribute the load in the tub and set the washer on SPIN.

STOPS

•Turn the control dial to proper cycle and pull dial out to start the washer. If equipped with buttons, be sure they are fully depressed.

•Close lid and pull dial out to start the washer. For your safety, washer will not agitate or spin unless lid is closed.

•This may be a pause or soak period in the cycle. Wait briefly and it may start.

•The washer is equipped with a lid switch failure detector. If the lid switch should malfunction, the detector will stop fill operations for your safety. Call for service.

LEAKS WATER

•Make sure water inlet hose connections are tight at faucet and water valve.

•Make sure end of drain hose is correctly inserted and secured to drain facility.

•Avoid extended soaking – soak for 30 minutes or less.

•Avoid overloading.

IS NOISY

•Be sure washer is leveled properly as outlined in installation manual.

•Weak floors can cause vibration and walking.

•Be sure rubber feet are installed on leveling legs.

•A clicking sound may be the LoadSensor™ agitator as it moves

FILLS WITH THE WRONG TEMP- ERATURE WATER

•Turn both faucets on fully.

•Make sure temperature selection is correct.

•To obtain energy savings, warm water fills are lukewarm.

•While the washer is filling there may be a mixing of hot and cold water to reach the proper water temperature.

•Make sure hoses are connected to cor- rect faucets and inlet connections. Be sure water supply is regulated correct- ly. Flush water line before filling washer.

•Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check water heater capacity and recovery rate.

•Disconnect hoses and clean screens. Hose filter screens may be plugged.

CYCLE SELECTOR DIAL ADVANCES THROUGH “OFF”

• Extra Rinse is selected.

For further assistance contact Maytag

Appliances Sales Company,

Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

6

Page 6 Page 8
Page 7
Image 7
Maytag MAV-19 warranty Before YOU Call, Cycle Selector Dial Advances Through OFF
Page 6 Page 8

MAV-19 specifications

The Maytag MAV-19 is a top-of-the-line washing machine that combines advanced technology with impressive performance, designed to meet the needs of modern households. Known for its reliability and efficiency, the MAV-19 stands out in the crowded market of laundry appliances.

One of the standout features of the Maytag MAV-19 is its powerful motor. This heavy-duty motor not only enhances the washing power but also ensures that the machine operates quietly, a significant benefit for families who value peace in their homes. The motor’s robust construction allows it to handle even the toughest loads, making it ideal for busy households.

The MAV-19 also incorporates Maytag’s innovative Yet Another Way to Wash system, which mixes both agitating and impeller washing actions. This dual-action system allows for a more thorough yet gentle clean, reducing the wear and tear on fabrics while still effectively eliminating dirt and stains. Users can expect their clothes to come out cleaner without the risk of damage.

In terms of energy efficiency, the MAV-19 is designed to save on water and electricity. The machine is fitted with high-efficiency technology that ensures optimal cleaning with minimal resource consumption. This not only helps the environment but also translates to lower utility bills for users.

Temperature control is another significant feature of this washing machine. With multiple temperature settings, the MAV-19 allows users to customize their wash cycles based on fabric type and soil levels. This adaptability ensures that everything from delicate fabrics to heavily soiled work clothes receives the appropriate treatment.

The user-friendly interface of the MAV-19 is designed with convenience in mind. It includes an easy-to-read control panel, which simplifies the process of selecting the desired settings. Additionally, it features a large capacity drum, allowing users to wash larger loads in one go, saving time and effort.

Durability is a hallmark of Maytag products, and the MAV-19 is no exception. Constructed with robust materials, this washing machine is built to last, promising years of dependable service. It also comes with a solid warranty, reflecting the brand’s commitment to quality.

In summary, the Maytag MAV-19 offers a blend of advanced washing technology, powerful performance, energy efficiency, and durability, making it an excellent choice for households looking for a reliable washing machine that meets their laundry needs. Whether tackling everyday dirt or special care fabrics, the MAV-19 stands ready to deliver exceptional results.
Top Page Image Contents