Maytag MAV5920AGW important safety instructions Select Water Level, Select Wash/Rinse Temperature

Using the Controls – 3 Speed Select Models

STEP 1

Select Water Level

Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.

WATER LEVEL SETTING	LOAD SIZE
Mini	1/4 Full
Small	1/4 - 1/3
Medium	1/3 – 1/2
Large	1/2 – 2/3
Super	3/4 – Full

Note: Items must circulate freely for best results.

STEP 2

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water (select models) for rinsing. Use the chart below as a guide.

WASH/RINSE	LOAD TYPE
TEMPS
Hot/Cold	White and heavily soiled, color-fast
	items.
Warm/Warm	Moderately soiled, colored items.
(select models)
Warm/Cold	Moderately soiled, colored items;
	most wrinkle-free items.
Cold/Cold	Brightly colored, lightly soiled
	items; washable woolens.
Note: In wash water temperatures below 60° F,

Automatic Temperature Control (A.T.C.) (select models) provides the optimal wash water temperatures for cleaning. To save energy, the Automatic Temperature Control will regulate wash water temperatures by mixing hot and cold water to reach the proper water temperature.

WASH/RINSE	LOAD TYPE
TEMPS

These settings feature Automatic

Temperature Control:

ATC Hot/Cold,	Saves energy by adding cold water
	to the hot water from your water
ATC Warm/Cold
ATC Warm/Warm	heater. Provides optimum cleaning
(select models)	at lower temperatures.
	May add hot water to the incoming
ATC Cold/Cold	cold water as the washer fills. This
	assures that the water will be warm
	enough to properly activate
	detergent.

detergents do not dissolve well or clean well. Care labels define cold water as up to 85° F.

5