7
SkyBox™ Personal BeverageVendor Top and DoorAssembly (Select Packaging Only)
Carefully unpack the SkyBox™ personal beverage
vendor from the packaging.
If needed, follow these instructions for attaching the
door to the main unit of your SkyBox™ personal
beverage vendor.
Parts Quantity
Top Cover.........................................1
Main Unit.........................................1
Door ...................................................1
Door Wire Harness.......................1
STEP 1 –Attach Top Cover
•Slide hooks at front of top panel into slots at front of
main unit.
•Press top cover down in back so 3 tabs snap
securely into place onto back of main unit.
Assembly
STEP 2 – Attach Door
•Align hinges of door to hinge
posts on the main unit. Hold
door at an angle (greater
than 90°) from the main unit
opening. (Note: For your safety,
the door will not attach or
detach at a 90° angle.)
•Slide hinges down onto hinge
posts. Door will slide on easily.
DO NOT FORCE.
STEP 3 – Attach Door Wire Harness
•Attach one end of door wire harness to plug-in on
lower left corner of main unit opening, aligning plug
with small tab facing up to fit plug-in. Note: plug will
only fit one direction. DO NOT FORCE.
•Attach other end of door wire harness to plug-in on
lower right corner of door, aligning plug with small
tab facing up to fit plug-in. Note: plug will only fit
one direction. DO NOT FORCE.