Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.

3. Roll console out and down.

Logic Board Removal

1.Disconnect power supply to unit.

2.Remove Console.

3.Unlatch and disconnect the three plug-in connectors from logic control board, remove ground wire from the chassis and carefully remove the four flex circuit connectors.

4.Slide the entire Logic Board to the left, to allow the white tabs to align with the elongated slots.

Front Access Panel Removal

1. Disconnect power supply to unit.

2. Remove Console.

3. Remove 5 screws securing panel.

©2003 Maytag Appliances Company

16022785 Rev. 0

21

Page 21
Image 21
Maytag MCE8000AY manual Logic Board Removal, Front Access Panel Removal