Care | and Cleaning | ............................... |
Control Panel - clean with a soft, damp cloth. Do not use abrasive substances.
Tumbler - remove any stains (such as crayon, ink pen or fabric dye) with an all purpose cleaner. Then tumble old towels or rags to remove any excess stain or cleaning substance,
Cabinet - wipe off any marks with soap and water. Use an appliance wax once a year if desired.
Dryer Exhaust System - should be inspected and cleaned once a year to maintain optimum perfor- mance. The outside exhaust hood should be cleaned more frequently to ensure proper operation. (Refer to the Installation Instructions for more information.)
Reversing the Door .......................... ........ ..........
Directions for reversing the dryer door.
l) Remove the hinge hole covers and screws. Move the door catch cover to the opposite side.
2)While supporting the door, remove 2 screws in the hinges that secure the hinges to the cabinet.
3)Remove door by lifting slightly at the hinges and pulling the hinge tabs out of the hinge slots.
4)Move the following parts to the opposite side of the door: 2 hinges and 4 hinge screws, 4 door scre_ door strike and screw, inner door cover plate and screw.
5)Attach the door to the opposite side of the cabinet using the 2 counter sunk hinge screws. (See belou Screw the lower hinge screw in first, This will help to align the door and hinges.
6)Replace the hinge hole covers to the opposite side.
|
| Door Catch | Counter Sunk Screw | |
|
|
|
| |
."_ |
|
| £.. | Door |
i |
|
|
|
|
L |
|
|
| Door |
, | , |
|
| |
J | * | ,, | S | Strike |
'_, | , , | |||
, | , |
|
| |
| J | i |
|
|
| i | i |
|
|
W | j | tl |
| Door |
| " |
| ||
|
| i' | "''Screws | |
7
