Maytag MD9206 manual Clean the Lint Filter, Add a Fabric Softener Sheet, Use a Drying Rack

Models: MD9206

1 12
Download 12 pages 37.53 Kb
Page 5
Image 5

ool_oooooo_oooooo.@ooo,olooo,oooooomooooooOoolooeQQoo•

Clean the Lint Filter...

after each load.

to shorten drying time.

to operate more energy efficiently.

NOTE: Do not operate the dryer without the lint filter in place.

Load the Dryer Properly...

by placing only one wash load in the dryer at

avoid very small loads or mixing heavyweight and

lightweight clothes.

1

• when only one or two articles need drying, add a

few similar items to improve tumbling and drying

a time.l efficiency.

Add A Fabric Softener Sheet...

(If So Desired)

after loading the dryer.

to control static cling.

before the load becomes warm. This helps prevent greasy-looking softener stains.

and remove any used softener sheets from the dryer to prevent greasy-looking softener stains.

Use A Drying Rack...

{Found in select models or purchased separately from your dealer using part # MAL IO00AXX.)

to dry items, such as sneakers, pillows, caps, stuffed toys, washable sweaters, etc. inside the dryer without tumbling. (Make sure nothing hangs over the edge of the rack.)

with a Time Dry heat cycle or an Air Fluff cycle according to care label recommendations.

by positioning the rack in the tumbler with the two extension wires towards you. The legs should rest firmly on the front and back of the drum.

4

Page 5
Image 5
Maytag MD9206 manual Clean the Lint Filter, Add a Fabric Softener Sheet, Use a Drying Rack