Maytag MDB9100 Operating, Tips, Control Lock Option, Adding, a Forgotten, Delay/Resume, To Cancel

Delay/Resume

The Delay/Resume option can be used to automatically start the cycle at a later time, such as during off-peak hours for reduced energy cost or to reduce daytime heat buildup in the home.

To Set Up a Delay:

Select tile appropriate cycle and options for the load.

N Press the Dday/Resume pad until the desired amount of delay time (1 to 9 hours) is selected. The

delay time will begin counting down when the pad is released.

N The Dday/Resume indicator light will remain lit until the delay time has counted down.

The cycle will automatically start as soon as the delay time expires.

i '

ToCancel.Del_y:

Wait at least 2 seconds, then press the Delay/Resume pad again. The indicator light will go out and the cycle

will start or resume immediately.

Control Lock Option

The control touchpads can be locked to prevent unwanted use. If this feature is activated between cycles, the dish- washer cannot be operated until the controls are unlocked. If desired, the controls can be locked after a cycle or delay has started.

Setting the Control Lock:

Press the _ pad for three seconds.

NAn indicator light above the pad will illuminate when the controls are locked.

To Cancel:

NPress the _ pad for three seconds.

NTheindicat°rlightwillg°°ff

Operating

Tips

.......................................................

Starting

The Dishwasher

Adding

a Forgotten

item

N

Afterloadinodishwasherandaddingdetergent,Forbestcleaning,theforgottenitemshouldbeaddedearly--the

close

the dishwasher

by pressing

the door

until

the

ill the cycle.

latch

clicks.

_

Press

the

Delay/Resume

pad

or

unlatch

the

door.

N

To start

the

dishwasher,

firmly

press

the

desired

N

Wait

for the water

circulation

to

stop.

cycle and options pads. After a pause, the fill will

begin.

To prevent

unplanned

cycle

or

option

_

Open

the

door

and

add the item.

]

changes,

these selections

are

locked

in

after 1

_

Close

and

latch

the

door.

minute.

N

The

indicator

lights

for

the

selected

cycle

and

• If

Delay/Resume

was

pushed,

push

it

again

to

options

will

glow.

restart the dishwasher.

To cancel an

option,

press

the pad again.

To cancel

N

After

five

seconds, the cycle resumes automatically

at

a cycle,

press

the Drain/Off

pad.

the point

of interruption.

th